|
2021 China Die & Mould Industry Conference
|
|
28th June 2021
9：00-12:00
Address：Holiday Inn Shanghai Hongqiao
Conference Center
Wenhua Ballroom
Jinhua Ballroom
No.3555 Qixin Road, Minhang District, Shanghai/No169, Xingzhan Road
|
The 2nd Session of the Ninth Council of China Die & Mould Industry Association
——Unveiling the 14th Five-Year Plan Development Outline of Die & Mould Industry
The new round of "Key Enterprise of Die and Mould Exporting" Award Evaluation by CDMIA
|
|
China Die & Mould International Cooperation and Import-Export Conference
Promote the prosperity of the international mold market, and further enhance the international competitiveness of China's mold enterprises.
——To Promote international cooperation of China's die & mould industry through resource sharing of the ISTMA;
——Reports on the International Die & Mould：To promote the joint development of China-Germany and China-Japan complementary international die & mould markets, exchanges between China and die & mould export-oriented countries, and cooperation between China with the countries along The Belt and Road of die & mould market supply, accelerating the prosperity and joint development of the international die & mould market.
——Research Reports on the International Die & Mould Market: to promote the expansion of China's die & mould export share；
——ConstructiononChina Die & Mould Global Sales Service Base:Strengthen the construction of comprehensive marketing service capacity for die & mold export
|
|
28th June 2021
14：00-17:30
Address：Holiday Inn Shanghai Hongqiao
Conference Center
Wenhua Ballroom
Jinhua Ballroom
No.3555 Qixin Road, Minhang District, Shanghai/No169, Xingzhan Road
|
The 4th Propulsion Conference on Digitization and Information of Die & Mould Industry
Following the conferences were held in Guangzhou (January,2008), Ningbo (May,2009) and Qingdao (September,2011),The 4th Propulsion Conference on Digitization and Information of Die & Mould Industry is going to launch the “14th Five-Year Plan” digital and information deep integration, to enhance the die & mould industry energy level.
Through sharing digital reconstruction cases，promote the improvement of the digital capabilities of die & mould enterprises；Through the information system construction of die & mould enterprises, to enhance the cost reduction, quality and efficiency improvement,
Through "Evaluation method of digitization capability for die & mould enterprises " and" Evaluation method of automation capability for die & mould
enterprises " to promote the ecological construction of the entire industrial chain of die & mould enterprises.
——Exploration on Intelligent Manufacturing of die & mould
(Beijing Fanuc Mechatronics Co., Ltd.)
——Siemens machine tool manufacturing digital solutions and Industry Development Inspiration
(SIEMENS)
——《Evaluation method of digitization/automation capability for die & mould
enterprises》Promote the ecological construction of the entire industrial chain for die & mould enterprises
(Wuhan EMAN Technology Co., Ltd.)
——Industry 4.0 Digital Intelligent Manufacturing Cloud Platform—Optimize Manufacturing Process, Accumulate Manufacturing Process, Sharing Manufacturing Experience
(Tebis)
——Lean Production and Digital Transformation of Manufacturing Industry
(Suzhou Harmontronics Automation Technology Co., ltd.)
——Industry 4.0 in Die & Mould Manufacturing-Data-based Efficiency Improves Value Creation and Customer Productivity
(WERKZEUGBAU AKADEMIE Tooling Academy Aachen)
|
|
Technical Summit
|
|
28th June 2021 Afternoon
Address：Holiday Inn Shanghai Hongqiao
Conference Center
Jinghua Ballroom
No.3555QixinRoad, Minhang
District, Shanghai / No169, Xingzhan Road
|
The 4th Summit Forum on Quality Improvement, Efficiency Improvement
And High Quality Development of Die and Mould Manufacturing
Equipment
——Through sharing of Die & Mould Technology Application cases,guide Chinese
die & mould enterprises to improve the application level of precision equipment.
|
|
29th June 2021 Afternoon
Address: National Exhibition and
Convention Center (Shanghai)
3Hall 16/17 Gate
|
2021 Die & Mould Materials Summit Forum and Excellent Die & Mould
Materials Sharing Session
——T/CDMIA A003-2021--《Capability Evaluation Method for Die & Mould
Steel Suppliers》Standard interpretation
——Application of new high conductivity and wear resistant copper alloy in injection
mold
（Ningbo Boway alloy material Co., Ltd）
——The application characteristics of a new generation of coated cutting wire in high-
end die & molds
（Ningbo Boway alloy material Co., Ltd）
——Topics to be confirmed (Italian company)
|
|
29th June 2021 Afternoon
Address: National Exhibition and
Convention Center (Shanghai)
3Hall 16/17 Gate
|
2021 Plastic Mould Committee Directors and Deputy Directors Working
Enlarged Meeting (Invite Some Influential Plastic Die & Mould Companies to Participate in the Conference)
——The new structure of the Plastic Mould Committee of CDMIAwill be released and the issuance of deputy director certificate. Review committee annual work plan.
——Explore the co-construction of the industrial interconnection ecology of the Plastic Mould Committee, investigate the shortcomings of core resources, and promote industry complementaryof the plastic mould field；
——Reached the strategic cooperation intention of each director and deputy director unit on the technological achievements and empowered product industry demonstration.
——Discussion of project approval for Group Standards of T/CDMIA die & mould
Iot
|
|
Market Development
|
|
29th June -1st July 2021
3Hall 16/17 Gate
|
Matchmaking for VVIP Buyers from Global 500 Manufacturing Giants in China
——Connect automobile, consumer electronics, home appliances and IT industries wit die & mould industry
|
|
Full-scale Supply Chain Selection
Utilizing Fair Industry Evaluation to Enhance Brand Value, Realize Brand Marketing and Provide Full-day Service for Enterprises
|
|
29th June -1st July 2021
Address: National Exhibition and Convention Center(Shanghai)
4Hall
|
Assessment of “Excellent Suppliers Award”
——Relying on DMC, CDMIA will carry out the “Excellent Suppliers Award” every odd year by evaluating the exhibits(quality) and the comprehensive level of Exhibitors (equipment, technologies, operation and market feedback).
|
|
During the DMC2021
Celebrating the 100th Birthday of the Communist Party of China
|
|
The Series of Activities Celebrating the 100th Birthday of the Communist Party of China on July 1st
——Through print media, official website and advanced deeds wall of DMC north hall, Publicity of the deeds of party branch model construction to promote enterprise development.
——Watch the “Grand Gathering to Celebrate the 100th Anniversary of the Founding of the Communist Party of China”.
Party members from DMC Organizers and Host, exhibitors, visitors, and partners will conduct activities to revisit oath of join the party.
at the north Hall National Exhibition and Convention Center in July 1, 2021
|
China Die & Mould International Cooperation and Import-Export Conference
The 4th Propulsion Conference on Digitization and Information of Die & Mould Industry
Contact: Zhang Shujie Tel:010-88356461
The 4th Summit Forum on Quality Improvement, Efficiency Improvement And High Quality Development of
Die and Mould Manufacturing Equipment
2021 Die & Mould Materials Summit Forum and Excellent Die & Mould Materials Sharing Session
Consultation: Bai Yinjuan Tel:010-88356463
2021 Plastic Mould Committee Directors and Deputy Directors Working Enlarged Meeting
Contact: Zhang Ping Phone:15066233980
Assessment of “Excellent Suppliers Award”
Contact: Bai Yinjuan Tel:010-88356463
|
|
|
Summit of Domestic and Global Die & Mould Standards Overview and Die & Mould Standardization Construction
Enterprises Die & Mould Standard Formulation Training (Training Qualified Issuance of Training Certificate)
|
|
Advanced Notice of
2021 Third Quarter
|
Summit of Domestic and Global Die & Mould Standards Overview and Die & Mould Standardization Construction
Implementation of the 14th Five- Year Plan to strengthen the construction of innovative standard system to promote the systematic capacity of enterprises launched.
——Overview of international organization standards development.
——T/CDMIA standards positioning and China's die & mould standardization construction.
Enterprises Die & Mould Standards Formulation Training
——GB/T 1.1 2020《Directives for standardization》-Rules for the structure and drafting of standardizing documents.
——Analysis of common problem in standard formulation
|
|
2021 National Industry Vocational Skills Competition——The 19th National Machinery Industry Vocational Skills (Die & Mould) Competition (2021 Die & Mould Competition)
Publicity by CDMIA, Competition Organization, Competition Regulations, Competition Question Bank, Competition Reward, Reveled on Official Site: www.i2033.cn, and real time service competition
(2021 Die & Mould Competition)
|
|
Advanced Notice of 2021 Second Half
|
The 2021 Die & Mould Competition with the theme of "New Era, New Skills, New Dreams" was organized by the Ministry of Human Resources and Social Security of the People’s Republic of China and host by CDMIA. In order to realize the promotion of learning training, evaluation, construction by competition, and to provide
a solid foundation for comprehensively improving the workers and promoting the high quality development of die & mould manufacturing. The competition will be held in the centralized and open form, and the final team will be determined by the provincial selection competition.
——Trial Registration will be held from July to September 2021
(Implementation by local die & mould associations )
Player team training (Organized by CDMIA)
——Provincial trials will be held from October to November 2021
——The finals will be held in December 2021(Implementation by CDMIA)
|
Summit of Domestic and Global Die & Mould Standards Overview and Die & Mould
Standardization Construction
Contact: Ge Jingjin Tel:010-88356465
2021 National Industry Vocational Skills Competition——The 19th National Machinery Industry
Vocational Skills (Die & Mould) Competition (2021 Die & Mould Competition)
Equipment Support Contact: Zhang Shujie Tel:010-88356461
|
